Yamaha HTR-5835 owner manual •Enjoying 2-channelsoftware in surround, lilA*d%|tl

li'lA*d%'tl

•Some 6.l-channel compatible discs do not have the flag of a

6. l-channel signal which this trait can automatically detect. To

ellioy these kinds of discs with the extended surronnd mode. select "MATRIX".

•The extended surround mode is not available in the ±bllowing cases:

When "SUR. LR" (see page 55) is set to NONE.

When the source colmected to the MULTI CH INPUT jack is being played.

When the source being played does not contain surround left and right channel signals.

When a Dolby Digital KARAOKE sottrce is being played. When "2ch Stereo" or "Direct Stereo" is selected.

When "AIrTO" is selected while using STRAIGHT or one of the SUR. STANDARD programs.

•When the power of this unit is turned off. this setting will be reset to "AUTO".

•Enjoying 2-channel software in surround

Signals input from 2-channelsources can also be played

back on nmltiple channels.

Press AMP to select the AMP mode, then press

STANDARD on the remote control to switch

between the SUR. STANDARD and SUR.

ENHANCED programs.

STANDARD

Or press MOVIE to select the MOVIE THEATER program.

MOVIE

Press SELECT on the remote control to select the decoder.

SELECT

You can select from the following modes depending on

the type of software you are playing and your personal

preference.

When you select the SUR. STANDARD program:

PRO LOGI C

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

PLII Music

Dolby Pro Logic II processing for music software.

PLI I Game

Dolby Pro Logic II processing for game software.

Neo:6 Cinema

DTS processing tbr movie software.

Neo:6 Music

DTS processing for music software.

When you select the SUN. ENHANCED or MOVIE

THEATER program:

PRO LOGI C

Dolby Pro Logic processing for any sources.

PLII Movie

Dolby Pro Logic II processing for movie software.

Neo:6 Cinema

DTS processing for movie software.

5/

You can also select a decoder by pressing.j / i on the remote control when the decoder type is displayed in the front panel display.

28