Yamaha HTR-5835 _ -_Basic Setup, Room: S M >L, Subwooferyes, 1Press AMP, Press SET MENU

The basic setup feature is a useful way to set up your system quickly and with minimal effort.

Y

•If you wish to confi_lre the unit manually using more precise acliustments, use the detailed parameters in SOUND MENU (page 55) instead of using BASIC SETUP.

•Altering any parameters in BASIC? SETUP will reset all parameters in SOUND MENU.

•Initial settings are indicated in bold lbr each parameter.

Before you begin:

•Press SPEAKERS A or B on the fi'ont panel (or press AMP to select the AMP mode, then press SPEAKERS A or B on the remote control) to select the front speakers you want to use.

•Make sure you disconnect your headphones fi'om this unit.

1Press AMP.

Press SET MENU.

"BASIC SETUP" appears in the front panel display.

aETM[[_

_ -_ BASIC SETUP

Press ENTER to enter BASIC SETUP.

The ROOM parameter appears in the front panel

display.

Pressj / i to select the desired setting.

ROOM: S M >L

Select the size of the room you have installed your

speakers in. In general, the room sizes are defined as

follows:

[U.S.A. and Canada models]

S (small) 16 x 13ft, 200fl 2 (4.8 x 4.0m, 20m 2) M (medium) 20 x 16ft, 300fl2 (6.3 x 5.0m, 30m2)

L (large) 26 x 19ft, 450fl2 (7.9 x 5.8m, 45m2)

[Other models]
S (small)	3.6	x 2.8m, 10m2
M (medium)	4.8	x 4.0m, 20m2
k (large)	6.3	x 5.0m, 30m 2

Press d to display the SUBWOOFER

parameter.

Pressj / i to select the desired setting.

SUBWOOFER"YES

YES If yon have a subwoofer in your system.

NON K If you do not have a snbwoofer in yonr system.

21