Yamaha HTR-5835 owner manual •Connecting the AC power cord, •Memory back-up, lilit *lIPh

*_'li'li't_*lIPh'_

•Connecting the AC power cord

Plug the power cord into an AC wall outlet.

•AC OUTLET(S) (SWITCHED) ....... 2 outlets

Use these outlets to connect the power cords from your

other components to this unit. Power to the AC

OUTLET(S) is controlled by this unit's STANDBY/ON

(or SYSTEM POWER and STANDBY). The outlet(s)

supply power to any connected component whenever this unit is turned on. The maximum power (total power

consumption of components) that can be connected to the

AC OUTLET(S) is 100 W.

•Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode.

However if the power cord is disconnected from the AC wall outlet, or the power supply is cut for more than one week, the stored data will be lost.

When all connections are complete, turn on the power of

this unit.

(U.S.A. model)

STANDBY/ON

POWER

Press STANDBY/ON (or SYSTEM POWER on the

remote control) to turn on the power of this unit.

	POWER_
	or
Front panel	Remote control

20