Yamaha HTR-5835 Straight, Listening to unprocessed input signals, Virtual Cinema DSP, Lililiqiltl

lililiqil'tl

•Listening to unprocessed input signals

In STRAIGHT mode, two channel stereo sources are output from only the front left and right speakers. Multi- channel sources are decoded straight into the appropriate

channels without any additional effect processing.

Press STRAIGHT (or press AMP to select the

AMP mode, then press STRAIGHT on the remote

control) to select STRAIGHT.

STRAIGHT	_'	STRAEGHT
or	÷	%
Front panel	Remote control

This unit comes with a variety of input jacks. Do the

follovdng to select the type of input signals you want to

USe.

1 Rotate INPUT to select the input source.

STRAIGHT

Press STRAIGHT (EFFECT) (or STRAIGHT (ENT.) on the remote control) again so that "STRAIGHT"

disappears from the display when you want to turn the sound effect back on.

•Virtual CINEMA DSP

Virtual CINEMA DSP allows you to enjoy the CI_NTMA

DSP programs without surround speakers. It creates

virtual speakers to reproduce the natural sound field. If you set "SUR. LR" to NONE (see page 55), Virtual

CINEMA DSP activates automatically whenever you

select a CINEMA DSP sound field program.

Virtual CINEMA DSP will not activate, even when "SUR. LR" is set to NONE (see page 55) in the following cases:

When MULTI CH INPUT is selected as the input source. When headphones are connected to the PHONES jack.

2 Press INPUT MODE to select an input mode.

In most cases, use AUTO.

	VCR	VAUX		DIW_t _vrJ		_D,_D_ TU_ER CD
	mJUI,		B		....			<1
					m,-ImI mm
Input	source				Input mode
AUTO	Automatically				selects input		signals	in
	the	following			order:
	1)	Digital		signals*
	2)	Analog		signals
DTS	Selects		only		digital	signals	encoded	in
	DTS. If no DTS signals are input, no
	sound		is	output.
ANALOG	Selects		only analog signals. If no
	analog signals are input, no sound is
	output.

*If this unit detects a Dolby Digital or DTS signal, the

decoder automatically switches to the appropriate decoder.

Y

You can actiustthe default input mode of this unit (see page 58).

30