Yamaha HTR-5835 Only the center speaker outputs substantial sound, Cause, Remedy, Refer to, page

IIIf;,e]l]:l3.v_:[mlm]lll;[,

Problem

The sound suddenly goes off,

Only the speaker on one side can be heard.

Only the center speaker outputs substantial sound.

No sound from the effect speakers.

Cause

Remedy

Refer to

page

The

protection

circuitry has been

activated

Check

that the speaker

wires

are

not touching

each

because of a short

circuit,

etc.

other and then turn tiffs unit back on

Tile

sleep

timm

has mined

the unit off.

Turn

on

the

powa,

and

play

the

source again

Tile

sound

is ranted.

Press

MUTE

to cancel

a nmte

25

Incorrect

cable

COlmentions

Connect

the

cables

properly

If the problem

persists,

12

the cables may be dethctive

Incorrect

balance

settings

in SET

MENU.

Adjust

the SP LEVEL

settings.

55

When playing a monaural somce with a CINEMA DSP program, the somce signal is directed to the center channel, and the fiont and smround speakers outpnt eflhct

SOllnds

The	sound field programs	are turned off2	Press	STRAIGHT	(EFFECT) to mm them on.	30
You	are using a source or program		Tly	anothe_ sound	field program.	26, 48
combination that does not		output sound
fiom	all channels.

No sound from the center speaker.

No sound from the surround speakers.

No sound from the surround back speaker.

No sound from the

subwoofer.

The oulpnt level of the center speakm is set 1o lninilllllnl

"CENTER" in SET MENU is set to

NONE

One of the HiFi DSP programs (except for

6ch Stereo) has been selected.

The outpnt level of the surround speakers is set to minimum.

"SUR. LR" in SET MENU is set to

NONE

A monamal source is being played with

STRAIGHT.

"SUR. LR" in SET MENU is set to

NONE

"BASS OUT" in SET MENU is set to

FRONT when a Dolby Digital or DTS signal is being played

"BASS OUT" in SET MENU is set to SWFR or FRONT when a 2-channel source is being played

The somce does not contain low bass signals

Raise	the level		of tile center speaker.								55
Select	the	appropriate			setting		for the	center	speaker.		55
Tly anothm		sound		field		program.					26, 48
Raise	the ontpnt		level		of	the	sunound	speakers			55
Select	the	appropriate setting					tbr tile	sunound		left and	55
right	speakels.
Press STRAIGHT (EFFECT) to turn on the sound
fields
If the	smTound		left	and	right		speakers	are	set	to	55
NONE, the surround back speaker setting is
antomatically set to NONE Select the appropriate
setting tbr the smround speakms
Select	SWFR or BOTH										55
Select	BOTH.										55

68