Yamaha HTR-5835 Strai GHT, Displaying information about the input source, WWildqiIti, Rate, Jig

•When playing a DTS-CDiLD. be sure to set the INPUT MODE to DTS.

•If the digital output data of the player has been processed in an?" wa3: you may not be able to perfom_ DTS decoding even if you make a digital connection between this unit and the player depending on the player.

WWil'dqiI'ti

3Press u / d to display the following information about the input signal.

•Displaying information about the input source

You can display the type, fomlat and sampling frequency

of the current input signal.

1 Select the input source.

Press AMP to select the AMP mode, then press STRAIGHT so that "STRAIGHT" appears in the display.

STP_IGHT

then%

}

STRAI GHT

(Format)	Signal	format		display.	When	the	unit
	cannot detect a digital signal it
	automatically			switches	to analog		input.
	Number of source channels in the input
	signal. For example, a multi-channel
	soundtrack with 3 front channels, 2
	sun'ound channels and LFE, is
	displayed		as	"3i2iLFE".
	Sampling frequency. When the unit is
	unable to detect the sampling
	fi'equency		"Unknown"		appears.
rate	Bit rate. When the unit is unable to
	detect	the	bit rate "Unknown"			appears.
Jig	Flag	data	encoded with		DTS	or	Dolby
	Digital signals that cue this unit to
	automatically			switch decoders.

31