Yamaha HTR-5835 •To adjust the tone, To listen with headphones SILENT CINEMA, •To mute the sound

Select a sound field program if desired.

Press PROGRAM I h repeatedly (or press AMP to select the AMP mode, then press one of the sound field program buttons on the remote control) to select a sound field progrmn. (See page 48 for details about sound field programs.)

Front panel

or

.iwdrP%l,tl

•To adjust the tone

You can adjust the tonal quality

of your front left and rightTONE CONXaOL

speakers or headphones (when connected).

Press TONE CONTROL on the fi'ont panel repeatedly to select TREBLE or BASS, then press

BASS/TREBLE _+ repeatedly to increase or decrease.

•Select TREBLE to adjust the

high frequency response.

Select BASS to adjust the low l'requeney response.

',AM_

Remote control

•To listen with headphones

("SILENT CINEMA")

"SILENT CINEMA" allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS surround, through ordinal 7 headphones. "SILENT CINEMA" activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs. When activated, the "SILENT CINEMA" indicator lights up in the l}ont panel display.

•This unit will not be set to "SILENT CINEMA" when MULTI CH INPUT is selected as the input source.

•"SILENT CINEMA" is not effective when the Direct Stereo or 2ch Stereo program is selected, or in STRAIGHT mode.

Y

Speaker and headphone ac[iustmentsare stored independemly.

•If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surrotmd speakers may not match that of the front left and right speakers.

•TONE CONTROL is not effective with the Direct Stereo progam (page 29) or MULTI CH INPUT.

•\_]len TC. BYPASS is set to AUTO (page 57), and BASS and TREBLE are set to 0 dB, audio output automatically bypasses this unit's tone control circuitry.

•To mute the sound

Press MUTE on the remote control. The MUTE indicator flashes in the fi'ont panel display.

To resume the audio output, press MUTE again (or press VOLUME /+). The MUTE indicator disappears from the display.

Y

You can adiust the mnting level (see page 57).

25