Yamaha HTR-5835 With CODE SET depressed, use the numeric, code for the component to be used

You can control other components by setting the

appropriate remote control codes. (?odes can be set up for each input area. For a complete list of available remote

control codes, refer to "LIST OF REMOTE CONTROL (?ODES" at the end of this manual.

The following table shows the default component

(Library: component category) and the remote control code for each area.

Remote Control Code Default Settings

	Component		Default
Input area	category	Manufacturer	YAMAHA
	(Library)		code
CD	CD	YAMAHA	199
MDiCD-R	CD-R	YAMAHA	499
TL_rNER*1	TL_rNER	YAMAHA	FIX
DVD	DVD	YAMAHA	699
DTV CBL*2
V-AUX
VCR

*1 Yon can con_ol this unit and other Yamaha tuners only.

*2 Yon can only set TV remote control codes for the DTVi(BL button.

You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is initially set as listed above. In this case. try to set other YAMAHA remote control code(s).

While holding down CODE SET, press an

input selector button to select the

component you want to set up.

You must press and hold (ODE SET throughont this

procedure.

With CODE SET depressed, use the numeric

buttons to enter the four-digit remote control

code for the component to be used.

Refer to "LIST OF REMOTE CONTROL CODES"

at the end of this manual.

•If the lnanu±;actnrer ofyonr component has more than one code. try each of them until you find the correct one.

•You can only assign one remote control code to each input selector butron.

61