Yamaha HTR-5835 •Cable indications, •Analog jacks, •Digital jacks, _aY#H£oTJ,l, •Video jacks

[_aY#H£oTJ,'l

Do not connect this unit or other components to the mains

power until all connections between components are complete.

•Cable indications

For analog signals

left analog cables

right analog cables

For digital signals

optical cables

coaxialcables

For video signals

video cables

component video cables

•Analog jacks

You can input analog signals fi'om audio components by

connecting audio pin cable to the analog jacks on this unit. Connect red plugs to the right jacks and white plugs to the left jacks.

•Digital jacks

This unit has digital jacks lbr direct transmission of digital signals through either coaxial or fiber optic cables. You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both

the COAXIAL and OPTICAL jacks, priority is given to the input signals fi'om the COAXIAL jack. All digital

input jacks are compatible with 96-kHz sampling digital signals.

This unit handles digital and analog signals independently. Thus audio signals input to the analog jacks are only output to the analog OUT (REC)jacks.

Dust protection cap

Pull out the cap fi'om the optical jack before you connect the fiber optic cable. Do not discard the cap. When you are not using the optical jack, be sure to put the cap back in place. This cap protects the jack from dust.

•Video jacks

This unit has two types of video jacks. Connection

depends on the availability of input jacks on your monitor.

COMPONENTVK_EO

WDEO pR PB Y

@@@@

VIDEO jacks

For conventional composite video signals.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and color difference (PB, PR) to provide the best quality in picture reproduction.

Signal flow inside this unit
Input	Output
	(MONITOR OUT)

V_DEO

VIDEO

14