Yamaha HTR-5835 owner manual •Special considerations when recording, DTS software

Models: HTR-5835

1 81
Download 81 pages 3.65 Kb
Page 51
Image 51
4Start recording on the recording component.

Recording adjustments and other operations are

perlbrmed from the recording components. Refer to the

operating instructions for those components.

(U.S.A. model)

2

\_len this unit is set in the standby mode, you calmot record between other components connected to this unit.

The setting of TONE CONTROL, VOLUME, "SP LEVEL" (page 55) and the sound field pro_ams does not affect recorded material.

A source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.

Digital signals input to the DIGITAL INPUT jacks are not output to the analog AUDIO OUT (L/R) jacks lbr recording. You can only record analog signals.

A given input source is not output on the same REC OUT chmmel. (For example the signal input from VCR IN is not output on VCR OUT.)

Check the cop?Tight laws in your country to record from records, CDs. radio, etc. Recording of copyrighted material may infringe cop?Tight laws.

If you playback a video source that uses scrambled or encoded signals to prevent it fi'om being dubbed, the picture itself may be disturbed due to those signals.

1Turn on the power of this unit and all connected components.

2Select the source component you want to record from.

INPUT

or

Front panel

Remote control

3Start playback (or select a broadcast station) on the source component.

4Start recording on the recording component.

Y

Do a test recording belbre you start an actual recording.

Special considerations when recording

DTS software

The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise

being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them,

the following considerations and adjustments need to be made.

For DVDs and CDs encoded with DTS, when your player

is compatible with the DTS format, follow its operating

instructions to make a setting so that the analog signal will be output from the player.

47

Page 51
Image 51
Yamaha HTR-5835 •Special considerations when recording, DTS software, 4Start recording on the recording component