Sharp MD-MX20 operation manual To change the brightness of the display, Continued, Remote control

(Continued)

■ Remote control ■ To change the brightness of the display

●2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar)

●Batteries are not included.

Remote sensor

8" - 20' (0.2 m - 6 m)

15 15

●When inserting or removing the batteries, push them

toward the Ïbattery terminal.

●Installing the batteries incorrectly may cause the unit to malfunction.

Precautions for battery use:

●Insert the batteries according to the direction indicated in the battery compartment.

●Replace all old batteries with new ones at the same time.

●Do not mix old and new batteries.

●Remove the batteries if they are weak or if the unit will not be used for long periods of time.

This will prevent potential damage due to battery leakage.

Caution:

Do not use rechargeable batteries (nickel-cadmium battery, etc.).

Notes concerning use:

●Replace the batteries if the operating distance is reduced or if the operation becomes erratic.

●Periodically clean the transmitter LED on the remote con- trol and the sensor on the main unit with a soft cloth.

●Exposing the sensor on the main unit to strong light may interfere with operation. Change the lighting or the direc- tion of the unit.

●Keep the remote control away from moisture, excessive

heat, shock, and vibrations.

DIMMER
When bright	Lights up

When dark Goes out

1 Press the ON/STAND-BY button to turn the power on.

2 Press the DIMMER button.

●The display will become dimmer and the light around the VOLUME control will go out.

To return to the original brightness:

Press the DIMMER button again.

10