Sharp MD-MX20 Repeat and random play, Continued, P-Mode Md Cd, Repeat play, Random play

(Continued)

■Repeat and random play

P-MODE

MD 06

CD 06

1 Select the desired program source, CD or MiniDisc.

2 Press the P-MODE (play mode) button.

●Each time this button is pressed, the mode will change in the following order:

Repeat indicator

Random indicator

Disappears

3 Press the CD 06 or MD 06 button to start playback.

Repeat play

After the last track has been played, playback will return to the first track and begin again.

Random play

When the CD 06 or MD 06 button is pressed, all of the tracks will be played at random, and then playback will stop. (The same track will not be played back twice.)

To cancel repeat or random play:

Press the P-MODE button until the " R " or "RANDOM" dis- play disappears.

To repeat playback of selected tracks:

Enter the program for the tracks you want and start repeat play.

You can program a single track and play it repeatedly (refer to page 16).

Notes:

●If you press the CD 4 or MD 4 button during random play, you can move to the next track. On the other hand, the CD 5 or MD 5 button does not allow you to move to the previous track.The beginning of the track being played will be located.

●During APMS play, random play is not possible.

●When random or repeat play is selected during CD or MiniDisc playback, random or repeat play will start at that point.

●When using repeat play, be sure to press the CD ■ or MD

■ button after you have finished listening. Otherwise, the disc will play continuously.

17