Sharp MD-MX20 Minidisc Editing, What the editing function can do, To create a disc name

MINIDISC EDITING

■What the editing function can do

You can create original discs using the MiniDisc editing func- tion, on which you can change the order of the tracks and you can create disc or track names.

●Playback-only MiniDiscs cannot be edited.

●Tracks (up to 255 tracks per disc) can be named. Since track names are displayed when the beginning of each track is located or during playback, you can quickly check the name of each track.

■To create a disc name

TIMER/DELETE

2,6 1

3,5 2,4

1 Press the MD ■ button.

●The total number of tracks and the total playing time on a MiniDisc will appear.

2 Press the NAME/TOC EDIT button, and then select "DISC NAME" using the jog dial.

3 Within 10 seconds, press the MEMORY/ENTER button.

DISC

●The unit will enter the character input mode.

4 Select the character you want using the jog dial.

DISC

5 Press the MEMORY/ENTER button to enter the char- acter.

DISC

●Repeat steps 4 to 5 above to enter the characters in the name.

6 After entering all of the characters in the name, press the NAME/TOC EDIT button.

●The disc name will be recorded.

To erase a disc name:

After performing steps 1 to 3.

1Press the TIMER/DELETE button for 2 seconds or more.

●"NAME CLEAR" will flash.

2Press the MEMORY/ENTER button.

Notes:

●Up to 40 characters can be entered.

●This function cannot be used in the random play mode and APMS play mode.

■Type of characters used

Type of			Characters (Symbols)
characters
Capital letters	A B	C	D	E F	G	H I J K L M N O P Q
	R S	T	U	V W	X	Y Z
Symbols	1 2	3	4	5 6	7	8 9 0 ! "	$ % & '
	( )		+ , - . / ? @ < = > _

Number of characters you can enter

●Disc names and track names

Up to 40 characters (including spaces) can be entered for each name.

If more than 40 characters are entered, "NAME FULL" will appear.

●Total number of characters per MiniDisc

A total of approximately 1,700 characters can be used for all of the disc and track names. If more than 1,700 characters are entered, " TOC FULL" will appear.

While editing, the "TOC" indicator is displayed. This means the edit results have not been recorded on the MiniDisc.

To record the results, select another input or set the unit to the stand-by mode. During writing, the "TOC" goes out, all editing changes will be recorded on the disc.

26