Sharp MD-MX20 Error Messages, Error messages Meaning Remedy, Number or, Symbol, Er-MD

ERROR MESSAGES

When an error message is displayed, proceed as follows:

Error messages		Meaning	Remedy
BLANK MD		● Nothing is recorded.	● For playback, replace it with a recorded Mini-
		(Neither music nor disc name is recorded.)	Disc.
CAN'T COPY		● You tried to record from a copy prohibited CD.	● Replace the CD.
CAN'T READ		● The disc is damaged.	● Replace it with another disc.
(	:Number or	● TOC information cannot be read.	● Erase the disc and try recording again.
symbol)		● MiniDisc not specified.
CAN'T EDIT		● A track cannot be edited.	● Change the stop position of the track and then
			try editing it.
CAN'T REC		● Recording cannot be performed correctly due	● Re-record or replace the MiniDisc.
		to vibration or shock in the unit.
CAN'T WRITE		● The TOC information could not be created prop-	● Set this unit to the stand-by mode and try to
		erly due to a mechanical shock or to scratches	write the TOC again. (Remove any source of
		on the disc.	shock or vibration while writing.)
DISC FULL		● The disc is out of recording space.	● Replace the disc with another recordable disc,
			or erase some of the tracks on the disc to free
			up recording space.
E-CD 20		● The CD tray is not working properly.	● Set this unit to the stand-by mode and turn the
			power on again.
E. OVER		● You chose 21 or more tracks for track editing.	● Decrease the number of tracks.
EDIT OVER		● There is no space to make CD editing on the	● Replace it with a disc that has enough time to
		disc.	record.
Er-MD		● A MiniDisc is not working properly.	● Set this unit to the stand-by mode and turn the
(	:Number or		power on again.
symbol)
NAME FULL		● The number of characters for the disc name or	● Shorten the disc or track name.
		track name exceeds 40.
NO DISC		● A MiniDisc has not been loaded.	● Load a MiniDisc.
		● The MiniDisc data cannot be read.	● Reload the MiniDisc.
		● A CD has not been loaded.	● Load a CD.
		● The CD data cannot be read.	● Reload the CD.
NOT AUDIO		● The data recorded on this disc is not audio data.	● Select another track.
			● Replace the disc.
PLAY MD		● You tried to record on a playback-only disc.	● Replace it with another recordable disc.
PROTECTED		● The disc is write protected.	● Move the write protection tab back to its origi-
			nal position.
TEMP OVER		● The temperature is too high.	● Set this unit to the stand-by mode and wait for
			a while.
TOC FORM		● TOC information recorded on the MD does not	● Replace it with another disc.
(	:Number or	match the MiniDisc specifications or it cannot	● Erase the disc and try recording again.
symbol)		be read.
TOC FULL		● There is no space left for recording track num-	● Replace it with another recordable disc.
		bers.
TOC FULL 1		● There is no space left for recording character	● Replace it with another recordable disc.
		information.	● Erase the needless characters.
? DISC		● The data contains an error.	● Replace it with another disc.
		● MiniDisc not specified.

39