Protecting Images

Choosing Images IndividuallyChoose [Select].

zFollowing step 2 on p. 148, choose [Select] and press the mbutton.

Choose an image.

zPress the qrbuttons or turn the 7dial to choose an image, and then press the m button. is displayed.

zTo cancel protection, press the mbutton again. is no longer displayed.

z Repeat this process to specify other images.

Protect the images.

zPress the nbutton. A confirmation message is displayed.

zPress the qrbuttons or turn the 7dial to

choose [OK], and then press the mbutton.

Images will not be protected if you switch to Shooting mode or turn

the camera off before finishing the setup process in step 3.

149