67
Maintenance and Management
Check and Replace Toner Cartridges
Toner cartridges are consumable products. When the toner has almost run out, a message
appears in the display and streaks may appear on printed pages. Check the toner level, and
replace the toner cartridge if necessary.
When the <Cartridge replacement is needed soon.> message appears
on the display, the incoming faxes will be stored in the memory without
printing. You can also set to print the received faxes, however, the printed
documents may be light or blurred.
Press [ ] (Menu) <Fax RX Settings> <RX Function Settings>
<Continue Print. When Toner Is Nearly Out> <On>, and then press
[OK].

Checking the Toner Level

1

Press [ ] (Status Monitor/Cancel).

2

Press [▲] or [▼] to highlight <Device Status>, and then press [OK].

3

Press [▲] or [▼] to highlight <Remaining Toner>, and then press [OK].

4

Check the toner level.

• The toner level will appear as <OK>, <Low>, or <Nearly Out>.
5

Press [ ] (Status Monitor/Cancel) to close the screen.

Cart. parts life end.
Replacmnt. recommended
RX Mode: Auto
Resolution: 200 X 1
...
OR
When <Cartridge replacement is needed
soon.> message still appears in display, or print
result is not improved, replace the toner cartridge
(→p.68).
Gently shake the toner cartridge 5-6 times to
evenly distribute the toner (→p.68).
Check the toner level, as needed. See the bottom of this page.