Changing Shooting Function Settings
Changing the Way the Image Displays Right After Shooting
You can change the way the image displays right after shooting.
zChoose [Review Info], then press the qr buttons to choose an option.
Off | Displays the image only. | |
|
| |
Detailed | Displays detailed information | |
|
The area inside the AF frame is magnified, allowing you to check
Focus Check the focus. The procedure is the same as in “Checking the Focus” (p. 116).
Displaying the Overlay
You can display grid lines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for 3.5" x 5" and postcard size prints.
zhoose [Disp. Overlay], then press the qr buttons to choose an option.
Off | – | |
|
| |
Grid Lines | A grid overlays the screen. | |
|
| |
| Gray bars appear on the top and | |
3:2 Guide | bottom of the screen. This area | |
will not print when printing on | ||
| ||
| paper with a 3:2 aspect ratio. | |
Both | Both grid lines, and the 3:2 guide | |
appear. | ||
|
• In 
, you cannot set [3:2 Guide] or [Both].
• Grid lines will not be recorded on the image.
•The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas.
158