Canon 5664B001, SX150 IS manual 99

Adjusting the Flash Output

In D mode, you can choose 3 levels of flash output.

Set the mode dial to D.

Choose the flash output level.

zAfter pressing the mbutton, press the op buttons to choose X.

Complete the setting.

zPress the qrbuttons or turn the 5dial to choose the flash output level, then press

the m button.

XOnce set, X will appear on the screen.

• You can also set the flash output level by pressing the n button to choose [Flash Settings] (p. 92) in the 4tab, then choose [Flash Output] and press the qr buttons to choose a setting.

•In Mand Bmodes, you can set the flash output level if you press the n button to choose [Flash Settings] in the 4tab, then set [Flash Mode] to [Manual].

•If you press the rbutton then immediately press the nbutton when the flash is raised, the settings screen will appear.

99