Detecting a Face and Shooting (Smart Shutter)

Changing the number of shots

After touching on the screen in Step 1, touch op to change the number of shots. Touch ^ to complete the setting.

• Shutting both eyes will also be detected as a wink.

• If a wink is not detected, the shutter will release approximately 15 seconds later.

•If there are no people in the shot when the shutter button is pressed fully, the camera will shoot after a person enters the shot and winks.

Using the Face Self-Timer

The shutter will release approximately 2 seconds after the camera detects a new face (p. 93). You can use this when the photographer wants to be in the image, such as a group photo.

Choose .

z Choose

in Steps 1 – 2 on p. 62, then

touch

.

z Touch

, then touch ^.

ompose the shot and press the shutter button halfway.

zMake sure a green frame appears on the face focused on and white frames appear on other faces.

Press the shutter button fully.

XThe camera will enter shooting stand-by,

and [Look straight at camera to start count down] will appear on the screen.

XThe lamp will blink and the self-timer sound will play.

76