Using Optional Accessories

zzAlign the ○ mark on the ring with the ● mark on the camera, and then lift the ring off.

3Attach the back section of the conversion lens adapter.

zzAlign the ● mark on the back section with the ● mark on the camera, and then turn the adapter in the direction of the arrows until it locks in place.

zzTo remove the adapter, hold down the ring release button and turn the adapter in the opposite direction.

4Attach the controller to the camera.

zzAttach the control component of the macro ring lite to the hot shoe on top of the camera.

5Attach the flash unit to the conversion lens adapter.

zzPress the release buttons on both sides of the macro ring lite in and attach the macro ring lite to the conversion lens adapter.

6Choose shooting mode <G>, <M>, <B>, or <D>.

zzFlash settings can only be configured in these modes. In other modes, the flash is adjusted and fired automatically, as needed.

253