Using an Eye-Fi Card
Checking Connection InformationCheck the access point SSID used by the Eye-Fi card or the connection status, as needed.
zzPress the <n> button, choose [Eye-Fi Settings] on the [3] tab, and then press the <m> button.
zzChoose [Connection info], and then press the <m> button.
XXThe connection information screen is displayed.
Disabling Eye-Fi TransferConfigure the setting as follows to disable Eye-Fi transfer by the card, if necessary.
Choose [Disable] in [Eye-Fi trans.].
zzPress the <n> button, choose [Eye-Fi Settings] on the [3] tab, and then press the <m> button.
zzhoose [Eye-Fi trans.], and then choose [Disable].
•[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this reason, you cannot change settings for an inserted Eye-Fi card if the write-protect tab is in the locked position.
