Canon 70 Dubbing, controller, to stop dubbing, to begin dubbing, button on the wireless controller, 5. Press the AUDIO DUB. button on the wireless

Dubbing

CAMERA PLAY (VCR) CARD CAMERA CARD PLAY

		E
(	AUDIO SETUP	AUDIO DUB.•••AUDIO IN
	38)

1.Set the camcorder to PLAY (VCR) mode and load a recorded cassette.

Use a tape recorded in SP, 12-bit mode with this camcorder.

2.Open the menu and select [AUDIO SETUP]. Select [AUDIO DUB.], set it to [AUDIO IN] or [MIC. IN] and close the menu.

3.Locate the scene you wish to start audio dubbing.4.Press the PAUSE a button on the wireless controller.

5. Press the AUDIO DUB. button on the wireless			ZERO SET	REW	PLAY	FF
controller.			MEMORY
			AUDIO OUT
			12bit		STOP
“AUDIO DUB.” and “		a” appear.	AUDIO DUB.	PAUSE	SLOW	2
					AV DV REMOTE SET
6. Press the PAUSE a button on the wireless controller			ZERO SET	REW	PLAY	FF
to begin dubbing.			MEMORY
			AUDIO OUT		STOP
			12bit
• Audio device: Begin playback.			AUDIO DUB.	PAUSE	SLOW	2
					AV DV REMOTE SET
• Microphone: Speak into the microphone.
7. Press the STOP	3	button on the wireless controller	MEMORY	REW	PLAY	FF
			ZERO SET
to stop dubbing.			12bit		STOP
			AUDIO OUT
Audio device: Stop playback.			AUDIO DUB.	PAUSE	SLOW	2
					AV DV REMOTE SET

❍Use only tapes recorded in SP mode 12-bit audio sound with this camcorder. Audio dubbing will stop if the tape has a blank section or a section recorded in LP mode or 16-bit mode.

❍You cannot use the DV terminal for audio dubbing.

❍If you add sound to a tape not recorded with this camcorder, sound quality may decrease.

❍Sound quality may decrease when you add sound to the same scene for more than 3 times.

❍When you connect an audio device, check the picture on the LCD screen and

the sound via built-in speaker or audio device. You can also connect a TV via S- video terminal.

❍When you use the built-in microphone, you can either connect a TV via AV terminal to check the picture, or headphones to check the sound. When you connect a TV via S-video terminal, you can check the picture on the TV screen and the sound with headphones connected to the camcorder.

❍Set the zero set memory at the end of the scene you wish to dub audio. The camcorder will automatically stop audio dubbing at that point.

Editing

89