Canon 7545 Zoom Button, Focus Button, Volume Button, Mute Button, No Show Button, Bright Button

BEFORE OPERATION

ZOOM BUTTON

Used to adjust zoom. (P20)

FOCUS BUTTON

Used to adjust focus. (P20)

POWER

ZOOM FOCUS VOLUME

MUTE D.ZOOM INPUT

MENUBRIGHT

VOLUME BUTTON

Used to adjust volume. (P21)

D.ZOOM BUTTON

Used to select DIGITAL ZOOM +/– mode and resize image. (P29)

Operating Range

Point Remote Control Unit toward projector (Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about 16.4’ (5m) and 60° in front and rear of the projector.

MUTE BUTTON

Used to mute sound.(P21)

NO SHOW BUTTON

Used to turn the picture into black image. (P21)

AUTO PC ADJ. BUTTON

Use to operate AUTO PC Adjustment function. (P23)

LASER	LENS SHIFT
KEYSTONE
NO SHOW	FREEZE
AUTO PC ADJ.	IMAGE
P-TIMER

BRIGHT BUTTON

Used to enhance picture brightness. (P20)

LENS SHIFT BUTTON

Used to select LENS SHIFT function. (P20)

FREEZE BUTTON

Used to freeze the picture. (P21)

IMAGE BUTTON

Used to select image level. (P27, 32)

16.4’

(5 m) 60°

60°

WIRED REMOTE JACK

When using as the Wired Remote Control, connect the Remote Control Cable to this jack.

Battery installation is required when using as the Wired Remote Control.

KEYSTONE BUTTON

Used to correct keystone distortion. (P20, 35)

16.4’ (5 m)

Remote Control Batteries Installation

1 Remove the battery compartment lid.

Press the lid down- ward and slide it.

2	Slide the batteries into	3	Replace the compartment
	the compartment.		lid.

Two AA size batteries For correct polarity (+ and –), be sure the battery terminals are in contact with the pins in the compartment.

To insure safe operation, please observe the following precautions :

●Use (2) AA, UM3 or R06 type alkaline batteries.

●Replace two batteries at the same time.

●Do not use a new battery with an used battery.

●Avoid contact with water or liquid.

●Do not expose Remote Control Unit to moisture, or heat.

●Do not drop Remote Control Unit.

●If a battery has leaked on Remote Control Unit, carefully wipe the case clean and install new batteries.

●Danger of explosion if battery is incorrectly replaced.

●Dispose of used batteries according to batteries manufacturers instructions and local rules.

15