The wind screen is | WSON |
Eturned on ( 62).
Volume level ( 31): Speaker
SPEAKER
– +
HeadphonesPHONES
– +
SPEAKER
OFF
The AV/headphones terminal is switched
to headphonesPHONES ( 32).
Audio output | STEREO1 | |
( | 93) | STEREO2 |
|
| |
|
| MIX/FIXED |
|
| MIX/VARI. |
Time Code
0:12:34:12
This records counter information, including hour, minute, second, and frame number on a special data code area on the tape itself. It is reset automatically when a new tape is loaded. In CAMERA mode, the frame number doesn’t appear in the display.
Recording reminder
0sec
10sec
Additional | Information |
Mix balance ( 93)
Audio input and Microphone input ( 91) (MV500i only) Audio input
Microphone input
AUDIO IN
MIC.IN
When you start recording, the camcorder counts from 0SEC to 10SEC. Shots which are shorter than ten seconds may be difficult to edit later. On the other hand, if you are not planning to edit the recording, remember that a shot which does not contain action should generally last no longer than 10 seconds.
“ AUTO POWER OFF”
DV input ( | 78) | DV IN |
(MV500i only) |
|
converter ( 83)AVDV (MV500i only)
Condensation warning ( 104)
AUTO POWER OFF
•The camcorder will turn itself off if you leave it in record pause mode for more than about 5 minutes. This display appears 20 seconds (approx.) before the camcorder turns off.