Canon 7561A001, MV500i instruction manual Editing

Digitally Outputting Analog Video and Audio Signals — Analog-Digital Converter (MV500i only)

Connecting the camcorder to your VCR or 8 mm video camcorder allows conversion of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a DV terminal. The camcorder’s DV terminal works exclusively as an output terminal.

•There may be cases where analog-digital converter cannot be done properly, depending on the signals output from the connected equipment.

For example: Signals that include the copyright protective signal, or anomalous signals such as ones that include ghost signals, etc.

•You cannot use your headphones during digital conversion. Even if the AV/headphone terminal is set to “PHONES” through the menu, it will automatically be set to “AV”, and “PHONES” will disappear from the display.

•You are recommended to use power from a household mains outlet with the power adapter.

•Do not operate with a cassette inserted to the camcorder.

•Turn off the power of all equipment before performing connections.

•Refer also to the instruction manuals of the other equipment connected.

: Signal flow

E

S S-150 S-video Cable (optional)

OUTPUT

S(S1)-VIDEO

VIDEO

AV

STV-250N

Stereo Video Cable

AUDIO

L

R

Editing

MIC

DV

Side with	Side with arrow
arrow	CV-150F DV Cable (optional)

Downloaded From VideoCamera-Manual.com Manuals 83