Starting the Memory Card Startup Utility 66
Using the Memory Card Startup Utility (Windows)
Eject the Memory Card.
When you select this item, the indicator lamp starts blinking, a message is
displayed, and the printer gets ready for memory card ejection. When the
indicator lamp goes off, press the Eject button to eject the memory card.
Note
➤
If you are using Windows XP or Windows 2000, the computer recognizes
the card slot as a removable disk. Therefore, if you want to turn off the
printer while you are using the computer, perform the hardware removal
operation by using the " " icon found on the right side of the task bar.
Change the drive
’
s read/write attribute.
When you select this item, the
USB Memory Card Settings
dialog box is
displayed. You can change the mode (read-only mode, and read/write enabled
mode) of the card slot by following the instructions displayed on the screen. Be
sure to eject the memory card using
Eject the Memory Card
. before you
change the mode.
Auto-start an application when a card is inserted./Do nothing when a card
is inserted.
Select whether an application is to be started automatically when the memory
card is inserted.
Note
➤
The application to be started can be set in advance with the
Auto-Start
Properties
function.
➡
Setting the Application to Be Started