Starting the Memory Card Utility 76
Using the Memory Card Utility (Macintosh)
Change the drive’s read/write attribute.
When you select this item, the
Drive Settings
dialog box is displayed. You can
change the mode (read-only mode, and read/write enabled mode) of the card
slot by following the instructions displayed on the screen. Be sure to eject the
memory card before you change the mode.
Auto-start an application when a card is inserted.
/
Do nothing when a card
is inserted.
Select whether an application is to be started automatically when the memory
card is inserted.
Note
➤
The application to be started can be set in advance with the
Auto-start an
application when
function.
➡
Setting the Application to Be Started
Do not display this dialogue when a card is inserted.
When this checkbox is selected, this screen is not displayed even when a
memory card is inserted. Specified application starts according to the
Auto-
start an application when a card is inserted.
/
Do nothing when a card is
inserted.
setting.
Quit
This item terminates the Memory Card Utility.