Unidentified Image/Incompatible JPEG/Image too large./Cannot play back MOV

•Unsupported or corrupt images cannot be displayed.

•It may not be possible to display images that were edited or renamed on a computer, or images shot with another camera.

Cannot magnify!/Cannot play back this content in Smart Shuffle/ Cannot rotate/Cannot modify image/Cannot modify/Cannot assign to category/Unselectable image./No identification information

•The following functions may be unavailable for images that were renamed or already edited on a computer, or images shot with another camera. Note that starred (*) functions are not available for movies. Edit ID Info* (=112 – 113), Magnify* (=113), Smart Shuffle* (=115), Rotate (=120), Favorites (=121), Edit* (=124 – 127), Print List* (=180), and Photobook Set-up* (=182).

•Grouped images cannot be processed (=79).

Invalid selection range

•When specifying a range for image selection (=117, 120, 181), you attempted to choose an initial image that was after the final image, or vice-versa.

Exceeded selection limit

•More than 998 images were selected for Print List (=180) or Photobook Set-up (=182). Choose 998 images or less.

•Print List (=180) or Photobook Set-up (=182) settings could not be saved correctly. Reduce the number of selected images and try again.

•You attempted to choose more than 500 images in Protect (=116), Erase

(=118), Favorites (=121), Print List (=180), or Photobook Set-up (=182).

Communication error

•An excessive amount of images (approx. 1,000) on the memory card prevented printing or image transfer to a computer. To transfer the images, use a commercially available USB card reader. To print, insert the memory card directly into the printer card slot.

Naming error!

•The folder could not be created or images could not be recorded, because the highest supported folder number (999) for storing images on the card has been reached and the highest supported image number (9999) for images in folders has been reached. On the [3] tab, change [File Numbering] to [Auto Reset] (=161), or format the memory card (=160).

Lens Error

•This error may occur if the lens is held while it is moving, or when the camera is used in dusty or sandy locations.

•Frequent display of this error message may indicate camera damage. In this case, contact a Canon Customer Support Help Desk.

A camera error was detected (error number)

•If this error message is displayed immediately after a shot, the image may not have been saved. Switch to Playback mode to check for the image.

•Frequent display of this error message may indicate camera damage. In this case, write down the error number (Exx) and contact a Canon Customer Support Help Desk.

File Error

•Correct printing (=176) may not be possible for photos from other cameras or images that have been altered using computer software, even if the camera is connected to the printer.

Print error

•Check the paper size setting (=178). If this error message is displayed when the setting is correct, restart the printer and complete the setting on the camera again.

Ink absorber full

•Contact a Canon Customer Support Help Desk to request assistance with ink absorber replacement.

Cover

Before Use

Common Camera Operations

Basic Guide

Advanced Guide

1

Camera Basics

2

Auto Mode /

Hybrid Auto Mode

3

Other Shooting

Modes

4 P Mode

5

Tv, Av, M, and

C Mode

6

Playback Mode

7

Wi-Fi Functions

8

Setting Menu

9

Accessories

10

Appendix

Index

189