Instead of saving images in folders created each month, you can have the camera create folders each day you shoot to store shots taken that day.
zzChoose [Create Folder], and then choose [Daily].
zzImages will now be saved in folders created on the shooting date.
Metric /Change the unit of measurement shown in the zoom bar (=30), the MF indicator (=80), GPS information for elevation (=153), and elsewhere from m/cm to ft/in as needed.
zzChoose [Units], and then choose [ft/in].
Calibrate the electronic level if it seems ineffective in helping you level the camera.
For greater calibration accuracy, display grid lines (=98) to help you level the camera in advance.
1Make sure the camera is level. zzPlace the camera on a flat surface, such
as a table.
2Calibrate the electronic level. zzChoose [Electronic Level], and then press
the <m> button.
zzChoose [Calibrate] and press the <m> button. A confirmation message is displayed.
zzChoose [OK], and then press the <m> button.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is not possible unless you have calibrated the electronic level.
zzChoose [Electronic Level], and then press the <m> button.
zzChoose [Reset], and then press the <m> button.
zzOnce the electronic level has been reset, the menu screen is displayed again.
Cover
Before Use
Common Camera Operations
Basic Guide
Advanced Guide
1 | Camera Basics |
2 | Auto Mode / |
Hybrid Auto Mode | |
3 | Other Shooting |
Modes | |
4 P Mode | |
5 | Tv, Av, M, and |
C Mode | |
6 | Playback Mode |
7 | |
8 | Setting Menu |
9 | Accessories |
10 | Appendix |
Index
162