TROUBLESHOOTING
After AUTO SETUP
Warning message | Cause | Remedy | See | |
page | ||||
|
|
| ||
|
|
|
| |
| Speaker polarity is not correct. This |
|
| |
W1:Out of Phase | message may appear depending on the | Check the speaker connections for proper polarity | 15 | |
speakers even when the speakers are | (+ or | |||
|
| |||
| connected correctly. |
|
| |
|
|
|
| |
W2:Over24m/80ft | The distance between the speaker and the | Bring the speaker closer to the listening position. | — | |
listening position is over 24 m (80 ft). | ||||
|
|
| ||
|
|
|
| |
|
| Readjust the speaker installation so that all speakers | — | |
|
| are set in locations with similar conditions. | ||
|
|
| ||
| The difference of volume level among |
|
| |
W3:Level Error | Check the speaker connections. | 15 | ||
speakers is excessive. (No level correction | ||||
|
| |||
| is made.) | Use speakers of similar quality. | — | |
|
| |||
|
|
|
| |
|
| Adjust the output volume of the subwoofer. | 33 | |
|
|
|
| |
W4:SP Mismatch | The Wiring results are incompatible with | The current user settings will take priority. | — | |
the current user settings. | ||||
|
|
| ||
|
|
|
|
Notes
•If the ERROR or WARNING screens appears, check the cause of the problem and then perform the AUTO SETUP procedure again.
•If warning
•If warning
•If error
■ HDMI
Error message | Cause | Remedy | See | |
page | ||||
|
|
| ||
|
|
|
| |
Device Over | More than 5 HDMI components including | Reduce the number of the connected HDMI | — | |
this unit are connected. | components. | |||
|
| |||
|
|
|
| |
HDCP Error | HDCP testing failed. | Check that the connected HDMI components support | — | |
the HDCP copy protection standards. | ||||
|
|
| ||
|
|
|
|
INFORMATION | ADDITIONAL |
|
|
127