Yamaha X-V2600 owner manual Initializing sound field programs, Following display appears

EDITING SOUND FIELD PARAMETERS

2Press k / n repeatedly to select Stereo/Surround and then press h.

The following display appears.

PRESET/CHPRESET/CH

ENTER	ENTER
A-E/CAT.	A-E/CAT.

STEREO
MUSIC	Munich
ENTERTAINMENT	Vienna
MOVIE THEATER	Freiburg

3Press k / n repeatedly to select the sound field program you want to adjust and then press h.

The following display appears.

PRESET/CHPRESET/CH

ENTER	ENTER
A-E/CAT.	A-E/CAT.

5Press EXIT on the remote control to exit.

EXIT

MENU

SRCH MODE

Note

You cannot change parameter values when Memory Guard is set to On. If you want to change the parameter values, set Memory Guard to Off (see page 98).

Memory back-up

The memory back-up circuit prevents the stored data from being lost. However, the stored data will be lost in case the power cord is disconnected from the AC wall outlet for more than one week.

■Initializing sound field programs

To initialize each sound field program individually

1Repeat steps 1 to 3 to select the sound field program you want to reset and then press h.

2Press k / n repeatedly to select Initialize.

3Press EXIT on the remote control to exit.

EXIT

MENU

SRCH MODE

To initialize all sound field programs

Use the Sur.Initialize parameter in the Option menu (see page 98).

Munich	DSP Level
Vienna	Init. Delay
Freiburg	Room Size

4Press k / n repeatedly to select the sound field parameter you want to adjust and then press h.

See“SOUND FIELD PARAMETER DESCRIPTIONS” on page 68 for detailed descriptions of each sound field parameter.

PRESET/CHPRESET/CH

ENTER	ENTER
A-E/CAT.	A-E/CAT.

64