Yamaha X-V2600 owner manual Manual Setup Sound, LFE Level Low-frequencyeffect level

SYSTEM OPTIONS

Manual Setup (Sound)

Use this menu to adjust the sound parameters.

1Set AMP/SOURCE/TV to AMP and then press GUI TOP on the remote control.

AMP	GUI TOP
SOURCE	TITLE
	BAND
TV

■LFE Level (Low-frequency effect level)

Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

To access these parameters, select:

Manual Setup > Sound > LFE Level >

Control range: –20.0 to 0.0 dB

Control step: 1 dB

2Press k / n on the remote control to select Manual Setup and then press h.

PRESET/CHPRESET/CH

ENTER	ENTER
A-E/CAT.	A-E/CAT.

3Press k / n on the remote control to select Sound and then press h.

PRESET/CHPRESET/CH

ENTER	ENTER
A-E/CAT.	A-E/CAT.

	LFE Level
	Dynamic Range
Sound	Parametric EQ
Video	Tone Control
Basic	Audio Option

Speaker 0.0dB

Headphone

Speaker (Speaker low-frequency effect level)

Select to adjust the speaker LFE level.

Headphone (Headphone low-frequency effect level)

Select to adjust the headphone LFE level.

Note

Depending on the settings of LFE Level, some signals may not be output at the SUBWOOFER jack.

OPERATION ADVANCED

4Select the desired parameters and then press h to access and adjust.

PRESET/CH

ENTER

A-E/CAT.

83