SYSTEM OPTIONS
■Dynamic Range (Dynamic range)
Use to select the amount of dynamic range compression to be applied to your speakers and headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.
To access these parameters, select:
Manual Setup > Sound > Dynamic Range >
Choices: MAX (maximum), STD (standard),
MIN (minimum)
Speaker | MAX |
Headphone | STD |
| MIN |
Speaker (Speaker dynamic range)
Select to adjust the speaker compression.
Headphone (Headphone dynamic range)
Select to adjust the headphone compression.
•Select “MAX” to preserve the greatest amount of dynamic range.
•Select “STD” for general use.
•Select “MIN” for listening to sources at low volume levels.
■Parametric EQ (Parametric equalizer)
Use this feature to adjust the parametric equalizer of each speaker.
Manual Setup > Sound > Parametric EQ >
LFE Level |
|
Dynamic Range |
|
Parametric EQ | Test Tone |
Tone Control | Front L |
Audio Option | Front R |
1Press k / n to select Test Tone or the speaker you want to adjust.
•Test Tone turns on or off the test tone output when adjusting the tonal quality of each speaker.
•Front L adjusts the tonal quality of the front left speaker.
•Front R adjusts the tonal quality of the front right speaker.
•Center adjusts the tonal quality of the center speaker.
•Surround L adjusts the tonal quality of the surround left speaker.
•Surround R adjusts the tonal quality of the surround right speaker.
•Surround Back L adjusts the tonal quality of the surround back left speaker.
•Surround Back R adjusts the tonal quality of the surround back right speaker.
•Presence L adjusts the tonal quality of the presence left speaker.
•Presence R adjusts the tonal quality of the presence right speaker.
2Press h to access the settings window.
| PARAM | RESET |
Test Tone | EDIT | EXIT |
Band / Gain |
| |
|
| |
Front L |
|
|
Front R |
|
|
Center |
|
|
3Press l / h to select PARAM and then press
ENTER to select a parameter from Band (band), Freq. (frequency) or Q (Q factor).
4Press n to select EDIT and press ENTER to access the edit window.
| Band | #1 |
| Gain | 0.0dB |
Test Tone | Freq. | 125.0Hz |
| Q | 1.000 |
Front L
Front R
Center
The parameter selected in PARAM is highlighted.
•Press l / h to adjust the parameter.
•Press k / n to adjust the Gain.
•Press ENTER to exit the edit window.
84
