Yamaha X-V2600 owner manual Using Clear, 112, Basic Clear operations

REMOTE CONTROL FEATURES

4Press the buttons for the functions you want to include in the macro operation in sequence.

You can set up to 10 steps (10 functions). After you have set 10 steps, FULL appears and the remote control automatically exits the macro mode.

(U.S.A. model)

POWER POWER STANDBY POWER

Using CLEAR

You can clear all changes made in each function set, such as learned functions, macros, renamed source names and setup remote control codes.

■Basic CLEAR operations

1Set AMP/SOURCE/TV to AMP or SOURCE.

TV	AV		MCR 2: AV POWER
A	XM 2	AUDIO SEL	SLEEP
			MCR 3: AUDIO SEL
PHONO	TUNER	3	MULTI CH IN
		CD
V-AUX	CBL/SAT	MD/TAPE	CD-R
DTV	VCR 1	DVR/VCR2	DVD

MCR 1: DVD

1

AMP

SOURCE

TV

2Press CLEAR by using a ballpoint pen or similar object.

CLEAR appears in the display window.

Indicates the	CLEAR
number of macro
steps entered

Note

Flashes alternately so you can set the next step

If you do not complete each of the following steps within 30 seconds, the clearing mode will be automatically canceled. In this case, press CLEAR again.

Note

To change the selected source component, press SELECT k / n. Pressing the input selector buttons will program a macro step, whereas SELECT k / n only changes the selected component and corresponding component control area.

5Press MACRO again when the operation sequence you want to program is complete.

Note

ERROR appears in the display window if you press a button not indicated in the respective step, or if you press more than one button simultaneously.

Memory back-up

The memory back-up circuit prevents the stored data from being lost. However, the stored data will be lost in case the power cord is disconnected from the AC wall outlet for more than one week.

3Press k / n to select the clear mode.

L;CD	Clears all learned functions in the respective
	component control area. Press an input selector
	button to select the component.
L;AMP	Clears all learned functions for this unit’s control
	area.
L;ALL	Clears all learned functions.
M;ALL	Clears all programmed macros.
RNAME	Clears all renamed source names.
FCTRY	Clears all remote functions and returns the remote
	to the factory settings.

Note

The name of a component is shown after a semicolon (;).

4Press and hold CLEAR again for about 3 seconds.

WAIT appears in the display window. If clearing was successful, C;OK appears in the display window.

CLEAR

y

Once you have cleared a learned function for a button, the button reverts to the factory setting (or to the manufacturer setting, if you have set remote control codes).

Note

L;ALL and FCTRY may take about 30 seconds to complete.

112