Yamaha X-V2600 owner manual Dimmer Dimmer, Multi Zone Multi zone, Speaker B Speaker B, Notes

5When finished adjusting parameters, press ENTER on the remote control.

PRESET/CH

ENTER

A-E/CAT.

■Dimmer (Dimmer)

Use to adjust the brightness of the front panel display.

Manual Setup > Option > Dimmer >

Control range: –4 to 0

Dimmer 0

Multi Zone

Sur.Initialize

■Multi Zone (Multi zone)

Use this feature to customize the Zone 2 and Zone 3 settings.

Manual Setup > Option > Multi Zone >

Choices: Speaker B, Zone2 Amplifier, Zone3 Amplifier, Zone2 Volume, Zone3 Volume, Zone2 OSD

Dimmer	Speaker B
Multi Zone	Zone2 Amplifier
Sur.Initialize	Zone3 Amplifier
Audio Select	Zone2 Volume

SYSTEM OPTIONS

Speaker B (Speaker B)

Use this feature to select the location of the front speakers connected to the SPEAKERS B terminals.

Choices: Main, Zone B

Speaker B	Main
Zone2 Amplifier	Zone B
Zone3 Amplifier

•Select “Main” to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.

•Select “Zone B” if the speakers connected to the SPEAKERS B terminals are set in another room. If SPEAKERS A is turned off and SPEAKERS B is turned on, all the speakers including the subwoofer in the main room are muted and the unit outputs sound from SPEAKERS B only.

Notes

•If you select “Zone B” and connect headphones to the PHONES jack on this unit, the sound is output from both the headphones and SPEAKERS B.

•When a DSP program is selected, the unit automatically enters the Virtual CINEMA DSP mode.

OPERATION ADVANCED

95