Yamaha X-V2600 Audio Select Audio selection, Decoder Mode Decoder mode, Front Input Front input

SYSTEM OPTIONS

■Audio Select (Audio selection)

This unit comes with a variety of input jacks. You can select the type of input signal you want to use.

Input Select > input source (DVD, etc.) > Audio Select > Choices: Auto, HDMI, Coax/Opt, Analog

I/O Assignment
Audio Select	Auto
Decoder Mode	HDMI
Volume Trim	Coax/Opt

•Select “Auto” if you want signals to be input to this unit in the following order: HDMI signals, digital signals* and analog signals.

•Select “HDMI” if you only want HDMI signals to be input to this unit. If no HDMI signals are input, no sound is output.

•Select “Coax/Opt” if you want digital signals to be input to this unit at the OPTICAL or COAXIAL jacks. Use if HDMI signals are also being input.

•Select “Analog” if you only want analog signals to be input to this unit. If no analog signals are input, no sound is output.

*If this unit detects a Dolby Digital or DTS signal, the decoder automatically switches to the appropriate sound field program.

y

•You can adjust the default input mode this unit selects when the power is turned on (see page 98).

•DTS mode is recommended for playback of a CD or LD encoded in DTS.

Note

If the digital output data of the player has been processed in any way, you may not be able to perform DTS decoding even if you make a digital connection between this unit and the player.

■Decoder Mode (Decoder mode)

Use this feature to switch the input mode. You can designate the reassigned digital input jacks (see page 81) for specific audio signals (DTS, etc.).

Input Select > input source (DVD, etc.) >

Decoder Mode >

Choices: Auto, DTS

I/O Assignment
Audio Select
Decoder Mode	Auto
Volume Trim	DTS
Rename

•Select “Auto” if you want this unit to automatically detect input signal types and select the appropriate input mode.

•Select “DTS” if you want this unit to select DTS as the input mode.

■Multi CH Assign

(Multi channel assignment)

Use this feature to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks. If you are inputting 8-channel signals from an external decoder, use this feature to select jacks for the additional front signals.

Input Select > MULTI CH > Multi CH Assign >

Volume Trim

Multi CH Assign Input Channels

Front Input

Input Channels (Input channels)

This setting is used to select the number of channels input from an external decoder.

Choices: 6ch, 8ch

Note

If Zone2 Amplifier (page 96) is set to “Internal”, no sound is output from the surround back speakers even if you select “8ch”. In this case, select “6ch” and set the output setting of the external component to 6 channels.

Front Input (Front input)

If you selected “8ch” in Input Channels, you can select analog jacks at which front signals from an external decoder will be input.

Choices: DVD, DTV, CBL/SAT, VCR1, DVR/VCR2, V-AUX, CD, CD-R, MD/TAPE

82