AUTO SETUP
5Press k / n repeatedly to select Wiring,
Distance, Size, Equalizing or Level and then press h.
Skip
Wiring Check
Distance
Size
Wiring | Skip |
Distance | Check |
Size |
|
Equalizing |
|
For Equalizing, press k / n to select:
Skip To skip the selected item and perform no adjustments.
Check: Natural To average out the frequency response of all
| speakers with higher frequencies being less |
| emphasized. Recommended if the “Flat” |
| setting sounds a little harsh. |
Check: Flat | To average the frequency response of all |
| speakers. Recommended if all of your |
| speakers are of similar quality. |
Check: Front | To adjust the frequency response of each |
| speaker in accordance with the sound of |
| your front speakers. Recommended if your |
| front speakers are of much higher quality |
| than your other speakers. |
Wiring |
|
Distance | Skip |
Size | Check |
Equalizing |
|
Level |
|
Distance |
|
Size | Skip |
Equalizing | Check: Natural |
Level | Check: Flat |
| Check: Front |
7Once you have selected the desired setting, press l to move back to Setup Menu.
Information |
|
|
Setup Menu |
| Wiring |
| ||
| ||
Setup Type |
| Distance |
| ||
| ||
Start |
| Size |
Size |
|
Equalizing | Skip |
Level | Check |
6For Wiring, Distance, Size or Level, select:
Check | To automatically check and adjust the selected |
| item. |
Skip | To skip the selected item and perform no |
| adjustments. |
y
When using THX speakers, select “Skip” for Size and make sure that “Small” or “Small x2” is selected in Speaker Set (see page 90) and that “80Hz” is selected in Bass Cross Over (see page 92).
8Press n to select Setup Type and then select:
Auto | To automatically perform the entire | |
| AUTO SETUP procedure. | |
Step | To pause for confirmation between | |
| each check in the AUTO SETUP | |
| procedure. |
|
Information |
| |
Setup Menu |
| |
Setup Type | Auto | |
Start |
| Step |
34