AMACRO
Programs a series of operations to be controlled with a single button (see page 110).
BSTANDBY
Sets this unit, Zone 2 and Zone 3 to the standby mode (see page 30).
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
CPOWER
Turns on this unit, Zone 2 and Zone 3 (see page 30).
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
DAUDIO SEL
Toggles the priority for the type of audio input jack between AUTO, HDMI, COAX/OPT and ANALOG when one component is connected to two or more input jacks on the rear panel (see page 44).
ESLEEP
Sets the sleep timer.
FMULTI CH IN
Selects MULTI CH INPUT when using an external decoder, etc.
GSELECT k / n
Selects another input source that you can control independently of the input source selected with the input selector buttons.
HVOLUME +/–
Increases or decreases the volume level.
IAMP/SOURCE/TV
Selects the component you want to control with the remote control.
AMP
Set to this position to operate this unit.
SOURCE
Set to this position to operate the component selected with an input selector button.
TV
Set to this position to operate the television assigned to either DTV or PHONO.
CONTROLS AND FUNCTIONS
Note
If televisions are assigned to both DTV and PHONO, the one assigned to DTV takes priority and gets operated when AMP/ SOURCE/TV is set to TV.
y
To set the remote control codes for other components, see page 105.
JMUTE
Mutes the sound. Press again to restore the audio output to the previous volume level.
KPURE DIRECT
Turns on or off the PURE DIRECT mode (see page 42).
LEXIT
Exits the GUI mode.
MNIGHT
Turns on or off the night listening modes (see page 42).
NSTRAIGHT (EFFECT)
Switches the sound field programs off or on. When STRAIGHT is selected,
OSPEAKERS A/B
Turns on or off the set of front speakers connected to the SPEAKERS A and/or B terminals on the rear panel each time the corresponding button is pressed.
P
Changes the name of the input source in the display window (see page 109).
QCLEAR
Clears remote control codes or functions acquired from the learn, macro and rename features (see page 112).
RLEARN
Programs remote control codes or functions from other remote controls (see page 107).
INTRODUCTION
9
