9Press n to select Start and then press
ENTER.
Loud test tones are output from each speaker and “Measuring” appears during the AUTO SETUP procedure.
Setup Menu
Setup Type
Start | Press ENTER |
AUTO SETUP
Confirming the results
You can confirm the results of each analysis.
If you set Setup Type to “Auto”
The results are displayed after all items have been analyzed.
Setup Menu |
| Retry |
Setup Type | Exit | Detail |
| Setup | |
|
| |
Start | Measurement Over | |
| Successfully |
y
•To stop the AUTO SETUP procedure, press one of the cursor buttons (k/ n / l / h) or ENTER. In the pause mode, press k to retry the procedure, l to cancel AUTO SETUP.
•If an error message appears during testing, refer to TROUBLESHOOTING on page 126, and after carrying out the remedy, retry the AUTO SETUP procedure.
•Press n and select Setup to set the measured values.
•Press k and select Retry to retry the AUTO SETUP procedure.
•Press h and select Detail to view information about measurement results and warning messages. For more details about warning messages, see TROUBLESHOOTING on page 126.
•Press l and select Exit to exit from the AUTO SETUP procedure. If you select Exit, “Don’t Setup?” appears on the screen. To set the measured values and exit, select Yes. To cancel the settings and exit, select No.
If you set Setup Type to “Step”
The results are displayed individually after each analysis.
Distance | Retry |
Exit Detail
Size
Next
Equalizing
Level
Result
•Press n and select Next to start measurement of the next menu item.
•Press k and select Retry to retry the AUTO SETUP procedure.
•Press h and select Detail to view information about measurement results and warning messages. For more details about warning messages, see TROUBLESHOOTING on page 126.
•Press l and select Exit to exit from the AUTO SETUP procedure. If you select Exit, “Don’t Setup?” appears on the screen. To set the measured values and exit, select Yes. To cancel the settings and exit, select No.
PREPARATION
35