AUTO SETUP
After all menu items have been measured, “Measurement Over” appears on the screen and the results for each item are displayed.
•Press n and select Setup to set the measured values.
•Press k and select Retry to retry the AUTO SETUP procedure.
•Press h and select Detail to view information about measurement results and warning messages. For more details about warning messages, see TROUBLESHOOTING page 126.
•Press l and select Exit to exit from the AUTO SETUP procedure. If you select Exit, “Don’t Setup?” appears on the screen. To set the measured values and exit, select Yes. To cancel the settings and exit, select No.
y
If you want to make more detailed settings, change the system parameters using the Manual Setup menu. If you want to return to the Auto Setup settings after making settings in the Manual Setup menu, navigate to the Information screen in the Auto Setup menu, press k / n repeatedly to select the parameter you want to adjust and then press ENTER.
Notes
•If you change speakers, speaker positions, or the layout of your listening environment, perform AUTO SETUP again to re- calibrate your system.
•Depending on your listening environment, SubWfr:REV may appear in the Wiring results. In this case, SWFR Phase in the Manual Setup menu (see page 92) is automatically set to Reverse. To select the desired setting, change the SWFR Phase parameter in the Manual Setup menu.
•In the Distance results, the distance displayed may be longer than the actual distance depending on the characteristics of your subwoofer. This may also be the case when using an external amplifier.
•In the Equalizing results, different values may be set for the same band to provide finer adjustments.
36
