5Repeat steps 3 and 4 until you are satisfied with the results.
y
If you want to reset all PEQ parameter settings for the selected speaker, select RESET and press ENTER.
6Select EXIT and press ENTER to exit the settings window.
y
•If you select “Band” in step 3, you can use this menu as a graphic equalizer.
•For more information on the parametric equalizer, see page 84.
■Tone Control (Tone control)
Use to adjust the amount of bass and treble output to your speakers and headphones.
Manual Setup > Sound > Tone Control > Choices: Control, Bass, Treble, Audio Bypass
Note
Tone Control is not effective when:
–THX (see page 72) or PURE DIRECT (see page 71) is selected.
–MULTI CH INPUT is selected.
Control (Tone control)
Choices: Speakers, Headphones
Control | Speakers |
Bass | Headphones |
Treble |
|
•Select “Speakers” to adjust the bass/treble balance of your speakers.
•Select “Headphones” to adjust the bass/treble balance of your headphones.
Bass (Bass control)
Use this feature to adjust
Choices: 125Hz, 350Hz, 500Hz (frequency)
| Speaker |
Control | Freq : 350Hz |
Gain : 0.0dB | |
Bass | +6 |
| |
Treble | +0 |
| |
|
SYSTEM OPTIONS
Treble (Treble control)
Use this feature to adjust
Choices: 2.5kHz, 3.5kHz, 8.0kHz (frequency)
Control | Speaker |
Bass | Freq : 3.5kHz |
Gain : 0.0dB | |
Treble | +6 |
| |
Auto Bypass | +0 |
|
Auto Bypass (Auto bypass)
Use to set this unit to automatically bypass any adjustments made for Tone Control.
Choices: Auto, Off
Bass
Treble
Auto Bypass | Auto |
Off
•Select “Auto” to set this unit to automatically bypass any Tone Control settings.
•Select “Off” to set this unit to reflect the Tone Control settings.
■Audio Option (Audio options)
Use to customize this unit’s overall audio settings.
Manual Setup > Sound > Audio Option >
Choices: Muting Type, Audio Delay, Max Volume,
Initial Volume, PR/SB Select
Muting Type (Muting type) |
| ADVANCED OPERATION |
|
| |
Use to adjust how much the mute function reduces the |
| |
output volume. |
|
|
Choices: Full, |
|
|
Muting Type | Full |
|
| ||
Audio Delay |
| |
Max Volume |
|
|
•Select “Full” to completely halt all output of sound.
•Select
85