Brother NX 600 operation manual Install the twin needle in the same way

GETTING READY ————————————————————————————————————————————

dHold the needle with your left hand, and then use a screwdriver to turn the needle clamp screw counterclockwise to remove the needle.

1

2

aScrewdriver

bNeedle clamp screw

•Do not apply a strong force when loosening or tightening the needle clamp screw, otherwise certain parts of the sewing machine may be damaged.

eWith the flat side of the needle toward the rear of the machine, insert the needle until it touches the needle stopper.

fWhile holding the needle with your left hand, use the screwdriver to tighten the needle clamp screw.

Install the twin needle in the same way.

CAUTION

●Be sure to insert the needle until it touches the needle stopper and securely tighten the needle clamp screw with the screwdriver, otherwise the needle may break or damage may result.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

36