Brother NX 600 List of stitch or machine attributes, Attribute Icon Details Reference

————————————————————————————————————————————————————

■ List of stitch or machine attributes

The stitch or machine attributes that can be set are listed below. For details on each attribute, refer to the

corresponding reference page.				CONTENTS
Attribute	Icon	Details	Reference
Thread tension		Adjusts the tension of the upper thread.	page 53
Automatic
reverse/		Specifies automatic reverse/reinforcement stitching.	page 57
reinforcement
stitching				GETTING
Automatic		Specifies automatic thread-cutting.	page 58
thread-cutting
				READY
Check pattern		Allows combined patterns to be checked.	page 118
Left/right		Mirror images patterns along a vertical axis.	page 122
mirror imaging
				SEWING
Pattern length		Adjusts the length of satin stitches.	page 120
Pattern size		Sets the size of patterns to be large or small.	page 119	BASICS
Repeated/		Specifies whether the pattern will be sewn once or	page 117
single sewing		repeatedly.
Stitching		Specifies the sewing density of the stitching.	page 120	UTILITY
density
Save settings		Allows adjusted thread tensions and pattern widths	page 60
		and lengths to be saved.		STITCHES
Needle		Specifies where the needle is positioned when the	page 16
position		sewing machine is stopped.
Twin needle		Specifies the twin needle.	page 28
sewing
Stitch width		Allows the stitch width to be adjusted with the sewing	page 98	APPENDIX
control		speed controller.
Language		Allows the language used in the screens to be	page 17
		changed.
Buzzer		Specifies whether or not a beep is sounded with each	page 148
		operation.
LCD brightness		Adjusts the brightness of the LCD.	page 16
				INDEX
Vertical pattern		Adjusts the up and down position of the pattern.	page 124
adjustment
Horizontal
pattern		Adjusts the left and right position of the pattern.	page 124
adjustment

Changing the Machine Settings 15