Brother NX 600 operation manual Sewing Cylindrical or Large Pieces, Stitching cylindrical pieces

Models: NX 600

1 159
Download 159 pages 62.2 Kb
Page 48
Image 48

GETTING READY ————————————————————————————————————————————

Sewing Cylindrical or Large Pieces

When sewing cylindrical or large pieces of fabric, remove the flat bed attachment.

CONTENTS

Stitching cylindrical pieces

Removing the flat bed attachment makes it easier to sew cylindrical pieces such as cuffs and pant legs.

aPull the flat bed attachment off to the left.

XWith the flat bed attachment removed, free- arm sewing is possible.

bSlide the part that you wish to sew onto the arm, and then sew from the top.

cWhen you are finished with free-arm sewing, install the flat bed attachment back in its original position.

Sewing large pieces of fabric

The optional wide table makes sewing large pieces of fabric easier.

aOpentable. up the legs at the bottom of the wide Pull out the four legs until they snap into place.

bPull the flat bed attachment off to the left.

XWith the flat bed attachment removed, free- arm sewing is possible.

cInstall the wide table.

Keeping the wide table level, fully slide it into place.

GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

Note

zThe optional wide table is available through your brother retailer.

INDEX

42

Page 48
Image 48
Brother NX 600 Sewing Cylindrical or Large Pieces, Stitching cylindrical pieces, Sewing large pieces of fabric