Brother NX 600 Adjusting the pressure of the presser foot, Removing the presser foot holder

————————————————————————————————————————————————————

Adjusting the pressure of the presser foot

The amount of pressure that the presser foot applies to the fabric can be adjusted.

aLower the presser foot lever.

1

aPresser foot lever

bTurnsewingthemachine.presser foot dial at the back of the The scale on the dial indicates the range from 1 (weak) to 4 (strong). Turn the dial to the right (smaller number) to decrease the pressure. Turn the dial to the left (larger number) to increase the pressure.

Strong		Weak
	3

Removing the presser foot holder

Remove the presser foot holder when cleaning the sewing machine or when installing a presser foot that does not use the presser foot holder, such as the quilting foot. Use the screwdriver to remove the presser foot holder.

■Removing the presser foot holder

aRemove the presser foot.

•For details, refer to "Replacing the presser foot" (page 37).

bUseholderthescrew.screwdriver to loosen the presser foot

1

aScrewdriver

■Attaching the presser foot holder

aAlign the presser foot holder with the lower- left side of the presser bar.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES

	Hold the presser foot holder in place with your
When you are finished sewing, reset the dial to	bright hand, and then tighten the screw using
c3 (standard).	the screwdriver in your left hand.

1

a Screwdriver

APPENDIX

INDEX

Replacing the Presser Foot 39