Brother NX 600 operation manual Automatically cutting the thread

SEWING BASICS ————————————————————————————————————————————

1

aReverse/reinforcement stitch button

XAfter reverse/reinforcement stitches are sewn, the sewing machine stops.

Memo

zReverse/reinforcement stitches will not be sewn if the start/stop button is pressed at the end of the stitching. Be sure to press the reverse/reinforcement stitch button at the end of the stitching.

Automatically cutting the thread

The sewing machine can be set to automatically cut the threads at the end of the stitching. This is called "programmed thread-cutting". If programmed thread- cutting is set, automatic reverse/reinforcement stitching is also set. This setting is convenient if a stitch for sewing buttonholes or bar tacks is selected.

aTurn on the sewing machine.

XThe LCD comes on.

bSelect a stitch.

•For details on selecting a stitch, refer to "Selecting stitching" (page 66).

cPress (Settings key) in the operation panel.

XThe settings screen appears.

dPressis selected., , and (Arrow keys) until

ePress (OK key).

XThe screen for specifying automatic thread- cutting appears.

CONTENTS GETTING READY SEWING BASICS UTILITY STITCHES APPENDIX

INDEX

58