HP 2820, 2840, 2830 manual Changing the silence-detect mode, To change the silence-detect mode

Changing the silence-detect mode

This setting controls whether or not you can receive faxes from older-model fax machines that do not emit a fax signal during fax transmissions. At the time of this publication, these silent-model fax machines represented very few of the fax machines in use. The default setting is Off. The silence-detect mode setting should be changed only if you regularly receive faxes from someone who uses an older-model fax machine.

To change the silence-detect mode

1.On the device control panel, press MENU.

2.Use the < or the > button to select Fax setup, and then press ENTER.

3.Use the < or the > button to select Fax Recv. setup, and then press ENTER.

4.Use the < or the > button to select Silence Detect, and then press ENTER.

5.Use the < or the > button to select On or Off, and then press ENTER to save your selection.

112 Chapter 8 Fax ENWW