
Printing on both sides (duplexing manually)
CAUTION
Note
To print on both sides of the paper, you have to return to the printer and reinsert the paper manually after the first side has printed.
Do not print on both sides of labels or transparencies. Damage to the printer and jams might result.
Macintosh operating systems do not support manual duplexing.
To duplex manually
1.Insert enough paper into one of the trays to accommodate the print job. If you are loading special paper such as letterhead, load it in one of these ways.
●For tray 1, load the letterhead paper
●For optional tray 2, load the letterhead paper
1tray 1
2optional tray 2
2.In the printer driver, select the Print on Both Sides option and send the job to print.
3.After the job finishes printing, remove any blank paper from tray 1. Insert the printed stack, with the blank side up, and the top edge leading into the printer. Print the second side from tray 1.
4. Press ENTER to continue printing.
50 Chapter 5 Printing | ENWW |