Changing the automatic document feeder (ADF) pickup roller assembly

To change the ADF pickup roller assembly

If your automatic document feeder (ADF) has trouble feeding paper, you can replace the ADF pickup roller assembly. See Accessories and ordering information to order an ADF pickup roller assembly. To remove the existing assembly, use the following procedure:

1. Turn off the device and unplug the power cord.

2. Open the automatic document feeder (ADF) cover.

3.Press the round green button while lifting the green lever. Rotate the green lever until it stops in the open position. The old pickup roller assembly should remain on the surface.

4.Remove the old assembly and put the new one in exactly the same place. The largest roller goes in back, and the gear side is away from you.

ENWW

Changing the automatic document feeder (ADF) pickup roller assembly 197

Page 213
Image 213
HP 2840, 2830, 2820 manual To change the ADF pickup roller assembly