
Solving scan-quality problems
Problem | Cause |
Blank pages | The original might have been |
| loaded upside down. |
Too light or dark | The resolution and color levels |
| may be set incorrectly. |
Solution
In the automatic document feeder (ADF), put the top end of the stack of originals into the ADF input tray, with the media stack
On the flatbed scanner, place the original document face- down with the
Verify that you have the correct resolution and color settings. See Scanner resolution and color.
Unwanted lines | Ink, glue, correction fluid, or an |
| unwanted substance might be |
| on the glass. |
| The ADF glass might be dirty. |
Black dots or streaks | Ink, glue, correction fluid, or an |
| unwanted substance might be |
| on the glass. |
Unclear text | The resolution and color levels |
| may be set incorrectly. |
Clean the flatbed scanner surface. See To clean the scanner glass.
Clean the ADF glass. See To clean the scanner glass.
Clean the flatbed scanner surface. See To clean the scanner glass.
Verify that you have the correct resolution and color settings. See Scanner resolution and color.
250 Chapter 14 Troubleshooting | ENWW |